Welcome to the MOMENTUM M6! This guide will help you get started with your new electric marine drive. Follow these steps to ensure a smooth setup and optimal performance.
Unboxing Your MOMENTUM M6
1. Check the Contents: Ensure that your package includes the following items:
MOMENTUM M6 Electric Marine Drive
Remote Throttle (if purchased)
Mounting Bracket
User Manual
Warranty Card
2. Inspect for Damage: Carefully inspect all components for any signs of damage during shipping. If you find any issues, please contact our customer support immediately.
Installation
Mounting the Drive
Choose the Mounting Location: Select a suitable location on your boat for mounting the MOMENTUM M6. Ensure that the area is clear of obstructions and provides adequate space for operation.
Attach the Mounting Bracket: Secure the mounting bracket to the chosen location using the provided hardware. Ensure that the bracket is firmly attached and level.
3. Install the Drive: Carefully place the MOMENTUM M6 onto the mounting bracket. Secure it using the provided bolts and nuts. Ensure that the drive is stable and properly aligned.
Connecting the Remote Throttle
1. Mount the Throttle: Choose a convenient location for the remote throttle on your helm. Use the provided mounting options to secure the throttle in place.
2. Connect the Throttle Cable: Attach the throttle cable to the MOMENTUM M6 and the remote throttle. Ensure that the connections are secure and free from any kinks or bends.
Powering Up
Connect the Power Supply: Connect the MOMENTUM M6 to a suitable power source. Ensure that the power supply meets the required specifications as outlined in the user manual.
Turn On the Drive: Use the power switch to turn on the MOMENTUM M6. The drive should power up and be ready for operation.
Initial Setup
1. Calibrate the Throttle: Follow the instructions in the user manual to calibrate the remote throttle. This ensures accurate control and optimal performance.
Check the Display: Verify that the integrated display on the remote throttle is functioning correctly. It should show relevant information such as power levels, speed, and range.
Safety Checks
Inspect the Installation: Double-check all connections and mounting points to ensure that everything is secure and properly installed.
Test the Drive: Perform a brief test of the MOMENTUM M6 in a controlled environment. Check for any unusual noises or vibrations and ensure that the drive operates smoothly.
Maintenance Tips
Regular Inspections: Periodically inspect the MOMENTUM M6 for any signs of wear or damage. Address any issues promptly to ensure continued performance.
Clean the Drive: Keep the drive clean and free from debris. Use fresh water to rinse off any saltwater or contaminants after each use.
3. Check the Cooling System: Ensure that the external passive seawater cooling system is functioning correctly. Clear any blockages that may impede water flow.
Troubleshooting
If you encounter any issues with your MOMENTUM M6, refer to the troubleshooting section in the user manual. For further assistance, contact our customer support team.
Choosing a selection results in a full page refresh.