Getting Started with MT-1 Remote Throttle

Welcome to the MT-1 Remote Throttle! This guide will help you get started with your new remote throttle for the M-series outboard. Follow these steps to ensure a smooth setup and optimal performance.

Unboxing Your MT-1 Remote Throttle

1. Check the Contents: Ensure that your package includes the following items:
  • MT-1 Remote Throttle
  • Mounting Hardware
  • User Manual
  • Warranty Card
    • 2. Inspect for Damage: Carefully inspect all components for any signs of damage during shipping. If you find any issues, please contact our customer support immediately.

    Installation

    Mounting the Throttle

    1. Choose the Mounting Location: Select a suitable location on your helm for mounting the MT-1 Remote Throttle. Ensure that the area is clear of obstructions and provides adequate space for operation.
  • Attach the Throttle: Secure the MT-1 Remote Throttle to the chosen location using the provided mounting hardware. Ensure that the throttle is firmly attached and level.
    • 3. Connect the Throttle Cable: Attach the throttle cable to the MT-1 Remote Throttle and the M-series outboard. Ensure that the connections are secure and free from any kinks or bends.

    Powering Up

  • Connect the Power Supply: Connect the MT-1 Remote Throttle to a suitable power source. Ensure that the power supply meets the required specifications as outlined in the user manual.
    • 2. Turn On the Throttle: Use the power switch to turn on the MT-1 Remote Throttle. The throttle should power up and be ready for operation.

    Initial Setup

    1. Calibrate the Throttle: Follow the instructions in the user manual to calibrate the MT-1 Remote Throttle. This ensures accurate control and optimal performance.
    2. Check the Display: Verify that the integrated display on the MT-1 Remote Throttle is functioning correctly. It should show relevant information such as power levels, speed, and range.

    Dimensions

    The MT-1 Remote Throttle is designed to be compact and easy to mount. Below are the dimensions for reference:
  • Length: 132 mm
  • Width: 135 mm
  • Height: 118 mm

    • Safety Checks

  • Inspect the Installation: Double-check all connections and mounting points to ensure that everything is secure and properly installed.
  • Test the Throttle: Perform a brief test of the MT-1 Remote Throttle in a controlled environment. Check for any unusual noises or vibrations and ensure that the throttle operates smoothly.

    • Maintenance Tips

    1. Regular Inspections: Periodically inspect the MT-1 Remote Throttle for any signs of wear or damage. Address any issues promptly to ensure continued performance.
    2. Clean the Throttle: Keep the throttle clean and free from debris. Use fresh water to rinse off any saltwater or contaminants after each use.

    Troubleshooting

    If you encounter any issues with your MT-1 Remote Throttle, refer to the troubleshooting section in the user manual. For further assistance, contact our customer support team.